The V-PAC™ SC Self-Contained Air Purification System
Powerful, yet Portable
The V-PAC™ SC Reduces Viruses, Bacteria and other VOCs within the Air Purifier
There are many facilities that need an immediate and portable solution to reduce a variety of air contaminants. The V-PAC SC™ addresses all four sources of indoor air pollution (particles, gases, aerosols and odors). The key to the system is photocatalytic oxidation that destroys viruses, bacteria and volatile organic compounds (VOC) in addition to particulate filtration within the air purifier.
Typical Room Air Contaminant Reduction:
- Particles greater than 99%
- Bacteria greater than 93%
- Total Volatile Organic Chemicals (TVOC) greater than 90%
Multistages of Air Cleaning Technology to Produce Better Air Quality
V-PAC™ SC has the capacity and power to reduce indoor contaminants in your home, office, casinos, hotels, or medical facilities effectively.
How it Works
- When UV light illuminates the titanium di-oxide (Ti02) coated photocatalytic oxidation grid, an activation process occurs.
- The activation generates highly reactive hydroxyl radicals and superoxide ions resulting in a strong chemical “oxidizing” reaction between the supercharged ions and gaseous pollutants such as VOCs and odor molecules.
- This breaks the pollutant down into trace amounts of carbon dioxide and water molecules, thus purifying the air!
Air Exchange Level Monitor and VOC Sensor Provides Total Indoor Air Quality Control
The air exchange monitor plays a huge role in providing the flexibility to change the air in a room to clean it. To achieve faster air purification, the fan speed can be increased to the maximum level.
- Monitor communicates when filter or lamp replacement is necessary
- VOC sensor detects VOCs and automatically adjusts fan speed
The 6 Stages of the V-PAC™ SC Air Purification System
FILTRATION: Traps Particles as Small as 0.3 Microns including Dust, Dander & Pollen
STAGE 1: 5 micron Prefilter (Front Side)
A 5 micron prefilter removes all particles from the air larger than 5 microns such as dust, dander, and pollen. The prefilter extends the life of the high efficiency filter and protects the gas adsorbing media from dust coating and fouling.
STAGE 2: Gas Adsorption Layer (Back Side of Prefilter)
First gas adsorption layer (Black) on the back side of the filter is a specially formulated gas adsorption media that adsorbs exhaust fumes, organic hydrocarbons, paint solvents, chlorine, cleaning chemicals and other fumes.
STAGE 3: 0.3 micron High Efficiency Filter (Front Side)
High efficiency filter that removes contaminants as small as 0.3 microns in size such as allergens, pollen, bacteria, viruses, spores and tobacco smoke.
STAGE 4: Gas Adsorption Layer 2 (Back Side of High Efficiency Filter)
A second gas adsorption layer (Black) on the back side of the filter is a specially formulated gas adsorption media that adsorbs exhaust fumes, organic hydrocarbons, paint solvents, chlorine, cleaning chemicals and other fumes.
GERMICIDAL AIR DISINFECTION: Destroys Airborne Microbes including Viruses, Bacteria and Fungi
STAGE 5: UV-C Lamp
Germicidal ultraviolet light (UV-C) is highly effective in destroying viruses and bacteria too small to be filtered out by a high efficiency filter. Ultraviolet technology combined with photocatalytic oxidation increases effectiveness of air disinfection.
ELIMINATION: Reduces Odors from Tobacco Smoke, Cooking and Volatile Organic Compounds (VOCs)
STAGE 6: Photocatalytic Converter
The key to photocatalytic oxidation is anatase TiO2, a semiconductor catalyst material that becomes highly reactive when exposed to specific wavelengths of ultraviolet light. This chemically oxidizes the odor molecules and converts them into trace amounts of carbon dioxide and water molecules.
Stage 1 — Prefilter: 5 Micron Rating
Gas Adsorption Layer: Activated Carbon
Stage 2 — High Efficiency Filter: 0.3 Micron Rating
Gas Adsorption Layer: Activated Carbon
Catalyst: TiO2 Anatase
Dimensions: 21.5" W x 18.5" H x 8" D
Weight: 23 lbs
Sound Level: 48-68 dBA
Maximum Air Volume: 265 CFM (8 m3/minute)
UV-C Lamp: 254 nanometers (germicidal)
Two Options Available:
Part Number: 41-1311-01 / 41-1313
Line Voltage: 115 V/60 Hz / 220 V/50 Hz
Maximum Watts: 92 watts / 59 watts
Maximum Amperes: .77 A / .26 A
CARB Certification Pending - Currently Unavailable in California